INNOVATIVE MECHANICAL FLANGE SPREADING WEDGE

This innovative spreading wedge is applicable for use on small to medium sized flanges and is mechanically operated using the supplied torque-wrench.

INNOVATIVE MECHANICAL FLANGE SPREADING WEDGE

This innovative spreading wedge is applicable for use on medium to large sized flanges and is actuated by an external hydraulic hand-pump.

INNOVATIVE INTERNAL HYDRAULIC FLANGE SPREADING

This self-contained innovative spreading wedge is applicable for use on medium to large sized flanges and is actuated by an integral hydraulic hand-pump, so no hoses or external pumps are required.

SECURE-GRIP MECHANICAL FLANGE SPREADERS

This lightweight mechanical SG range is applicable for small to medium sized flanges,are actuated by the supplied torque wrench, and are suitable for bolt holes 17.5mm (0.69”) to 39mm (1.54”).

SECURE-GRIP HYDRAULIC FLANGE SPREADERS

The hydraulic SG tools are applicable for use on medium to large sized flanges, are actuated by an external hand pump and are suitable for bolt holes from 38mm (1.49”) to 62mm (2.44”).

SECURE-GRIP IN-LINE HYDRAULIC FLANGE SPREADERS

This innovative spreading wedge is applicable for use on medium to large sized flanges and is actuated by an external hydraulic hand-pump.

SECURE GRIP VALVE CHANGE OUT TOOL.

The Equalizer™ VC Range of Valve Change-Out tools has been developed to assist in the removal of wafer/butterfly valves, spades/spacers or gaskets from largeflange joints. The span of the tool is longer than a standard Secure-Grip Flange Spreader and is adjustable to enable the tool to operate in a range of situations.

EXTERNAL HYDRAULIC NUT SPLITTER

The Equalizer NS Nut Splitter range has been designed in response to industry calls for a more effective tool to split nuts on flange joints both on and offshore. In addition to being cost effective and efficient, the Nut Splitter also meets Equalizer’s criteria for designing and developing tools which are safer to use. 9 – 75mm Nut Range.

MECHANICAL FLANGE ALIGNMENT TOOL

This portable, robust light-weight tool is a simple solution for small low-pressure flange misalignment requirements. It is hand-actuated using the crank handle.

MECHANICAL LINEAR & ROTATIONAL FLANGE ALIGNMENT

This mid-range mechanical tool is for use on medium diameter, medium pressure flanges, and can address both rotational and radial mis-alignment. It is actuated by the supplied torque-wrench.

SECURE-GRIP HYDRAULIC FLANGE SPREADERS

The Equalizer™ TFA15TI Integral Hydraulic flange alignment tool assists in aligning / de-ovalising large internal pipe flanges and specifically can help resolve bolt hole misalignment within the tower sections of wind turbines.

ACTUATED BY AN INTEGRAL HYDRAULIC HAND -PUMP ALIGNMENT

Actuated by an integral hydraulic hand-pump so no hoses or external pumps are required.