Skip to content

Hydraulic Pumps

Wren-Logo

MP SERIES ELECTRIC HYDRAULIC PUMP

MP series electric pump adopts integrated way: by the oil pump, control valve, fuel tanks, pneumatic motor, cooler, such as instrument of a kind of independent complete hydraulic device, has small volume, light weight, simple structure, convenient operation, high working pressure, etc. The pump is high and low pressure oil pump, can obtain the larger output oil. When high pressure, the low pressure pump is automatically returned to oil by unloading overflow valve and can reduce the power consumption, and (A) the oil pressure can be adjusted by 70~ 700Bar.

Type MP SERIES
Drive: Electric to Hydraulic
Tank Capacity 8L
Flow Rate 0.8 L/min
Pressure 0~700bar
Current 220V/50HZ
Power 1.1KW

Wren-Logo

KLW4010 Series Electric Pump

KLW4010 for special pump, hydraulic wrench assembly adopts integrated way, by the control unit, power unit, electrical devices such as an independent complete hydraulic device, composed of A large flow, large volume, light weight, simple structure, convenient operation, high working pressure, etc, and export (A) high pressure oil pressure can be adjusted between 70 ~ 700 bar.

  • Aluminum frame for easy carrying and protecting the elements
  • Pressure adjustor , pressure relief valve (inside the tank)
  • Pressure release button , it can release the pressure in system in the case of pump stopped
Mode KLW4010-2 KLW4010-4
Working pressure 70 MPa 70 MPa
Drive Electric Electric
Voltage 220V / 50Hz 220V / 50Hz
Power 1.1 KW 1.1 KW
Tank capacity 8 L 8 L
Flow rate 7-1.6-0.8 L/min 7-1.6-0.8 L/min
Oil cooler Yes Yes
Weight 26.5 Kg 28 Kg
Oil outputs 4×1/4″ NPT 8×1/4″ NPT
L×W×H(mm) 407×307×458 462×307×458

– Compact automatic three stage flow,most efficiency.

– Applicable on both one or two wrenches simultaneously.

– Aluminum oil tank with oil gauge and thermometer.

– Have Φ100 high pressure gauge.

– Working pressure:40~700 bar.

– With efficient radiator,the pump can work 24 hours continuously.

– The motor can be changed according to the different voltage.

– You can use manifold to operate 4 wrenches simultaneously.

Wren-Logo

KLW4010N Series Pneumatic Pump

KLW4010N special pump adopts the integrated method for hydraulic spanner, the oil pump, control valve, fuel tanks, pneumatic motor, cooler, such as instrument of a kind of independent complete hydraulic device, has small volume, light weight, simple structure, convenient operation, high working pressure, etc. The pump is high and low pressure oil pump, can obtain the larger output oil. When high pressure, the low pressure pump is automatically returned to oil by unloading overflow valve and can reduce the power consumption, and (A) the oil pressure can be adjusted anywhere from 70 to 700 bar.

  • Use where air(4-8 bar) is the preferred.
  • Compact power in 3 Stage flow design.
Wren-Logo

KLW4100 Series Torque Wrench Pump (Automatic Electrical Pump)

KLW4100 Series Automatic Electrical Pump shared a same desigh with KLW4000 series standard Electrical  Pump, it just was added a set of control  system (import from germany)on the basic of KLW4000 standard Pump , it inherited all the characteristics of KLW4000 , some other characteristics  of this Pump are as below.

  • Simple
  • High Efficiency
  • Manual/Automatic
Wren-Logo

DHP Series Double Engine High Speed Electric Pump

DHP were studied.the optimum processing series of special pump, hydraulic wrench assembly adopts integrated way, by the control unit, power unit, electrical devices such as an independent complete hydraulic device, composed of A large flow, large volume, light weight, simple structure, convenient operation, high working pressure, etc, and export (A) high pressure oil pressure can be adjusted between 70 ~ 70 bar.

  • Highly Efficient
  • Powerful
  • 70~700bar
Wren-Logo

KLW4010AEXII Explosion Proof Hydraulic Pump

Voltage: 380V / 50Hz, Three Phase 1.5KW, Or 220v/50hz,, 1.1KW one phase available

Power: 1.5KW OR 1.1KW (2800 rpm/min)

Usable Oil: 8 Liters

Flow:  7.2 L/min at low pressure at 65 Bar

1.6 L/min at middle pressure at 65Bar – 250Bar

0.8 L/min at high pressure at 250Bar – 700Bar

Max pressure: 700Bar

Operating with one or Two Torque Wrenches

With 100mm diameter pressure Gauge

With Remote control

Special power cable with plug

Weight : 45kgs

  • EXPLOSION PROOF

For Product Assistance or Enquiries on Availability, contact us here: